1. Quick Action Mechanical
Vice 2. Cabinet Stand With Doors 3. 2 Speed
Motor On All 3 Phase Machines 4. Overload Protection Switch
With Mushroom Button
For Quick Shut-Off 5. High Volume
Electric Coolant Pump (Sealless) 6. Overload Protection
Switch For Coolant Pump 7. Recirculation Coolant System 8. Large Removable Chip Tray 9. 7 Gallon Coolant
Tank 10. Complete Set Of Allen Wrenches 11.
Grease Gun 12. Standard Color - Hammertone Green 13. Quick Release Handles For Rapid Change Of Vice Position 14. 350MM (14") Sawblade 15. Doringer H-32 Coolant
Concentrate (1 Gallon) Mixing
Ratio 10:1 With Water 16. 1
Year Warranty
* Single Phase, 110/220 Volt, 1 Speed Motors
Available At No Extra Charge
Head easily miters to any position with
positive locking
at 90 degrees & 45 degrees.
Workpiece remains stationary while head
rotates for mitering.
Model D350 Optional Equipment
1. Air Vice Unit In Lieu Of Standard Mechanical Vice 2.
Additional Clamping Arm Attached To The Air Vice Unit 3.
Additional Clamping Arm Attached To Standard Mechanical Vice 4. Length Stop 0-40" 5. Slanted Table With
Down-Chute For High Production Cutting 6. Material Infeed
& Outfeed Conveyors 7. Special Jaws For Cutting Square
Tubing
Model D350 Technical Specifications
Available Voltages*
Motor Speed**
Sawblade Speed**
110/220 Volts, 1 Phase, 60 Cycle
1700 RPM
54 RPM
220 or 440
Volt, 3 Phase, 60 Cycle
850/1700 RPM
27/54 RPM
220 or 440
Volt, 3 Phase, 60 Cycle
1700/3400 RPM
54/108 RPM
* All Single Phase Motors Are Dual Voltage. All 3 Phase Motors
Are Single Voltage.
Please Verify Your Available Voltage. ** Gear Reduction Ratio 1:31 For High Torque.
Cutting Capacity
Round Tubing:
4.75" 0-45
Square Tubing:
4" Straight
3.6" 0-45
Rectangular:
6.3" X 2.75" Straight
4.75" X 2.35" 0-45
Solids:
2.5" 0-45
Weight and Dimensions
Machine Packed Weight:
780 LBS
Machine Unpacked Weight:
710 LBS
Machine Packed Dimensions:
64"H X 30"W X 43"L
Machine Unpacked Dimensions:
58"H X 26"W X 36"L
Model D350 Warranty
Warranty:
All products are warranted to conform to the
manufacturer's general standards of quality of materials and workmanship. Any
parts not meeting with standards will be supplied at no cost to the purchases up
to 12 months after delivery date and will be fitted on return of the machine to
the company's factory. Parts deemed by the manufacturer to have failed through
normal wear and tear, misuse or abuse are not covered by this warranty, even if
failure occurs during the 12 month warranty period. Sawblades and other
perishable tooling are not covered by warranty.
